4 Bottles of Inkpiu UV Dye Ink 100 mL (Cyan, Magenta, Yellow and Black Colors) Bundle
– Place a sheet of paper underneath the ink tank area, in case of spillage. Then turn on your printer. Make sure the powerlight is on, but not flashing.
– Unhook the ink tank unit from the product and lay it down, do not pull on the ink tubes.
– Open the ink tank unit cover, and then remove the ink tank’s cap. Make sure the color of the ink tank matches the ink color you want to refill, and only remove the cap from that ink tank. Be careful not to spill any ink.
– Snap off the tip of the bottle cap, but do not dispose of the bottle cap tip so you can use it to seal the bottle cap later, if necessary. Then remove the cap, remove the seal from the bottle, and replace the cap on the bottle. Make sure the color of the ink bottle matches the ink color you want to refill.
– Install the bottle cap tightly; otherwise, ink may leak.
– Refill the ink tank with the correct color ink up to the upper line on the ink tank.
-Light Cyan and Light Magenta are NOT included in the bundle.